HUAWEI Fusion Charge 22kW Car Charger: Solar Shop
 
Zatvori

Informacija

Molimo, pričekajte trenutak!

HUAWEI Fusion Charge 22kW 11kW 7kW

Punjač vozila HUAWEI Fusion Charge 22kW Car Charger

Huawei FusionCharge AC 22 kW Wallbox

The smart addition to your Huawei home storage system with type 2 charging socket and RFID

The Huawei Fusion Charge is the ideal complement to the Huawei complete system. You can see all the energy flows and information from your system and the charger in a directly networked app. Charge with excess PV and automatic phase switching1) for even more efficiency.

Phase switching1) 2) 

  • automatically between 1- and 3-phase2) Charging enables up to 100% solar energy

Load management

  • dynamic charging performance therefore no risk of power failure

Quick and easy

  • quick installation in 3 steps easy replacement (wireless)

Flexible access control

  • Bluetooth identification via the APP and RFID cards

Specifications

Inputs and outputs:
Charging power (adjustable):1.4 kW3) up to 22 kW
Voltage:400 V (3-phase) ±20%
Charging current (adjustable):6-32 A (3 or 1 phase)
Charging socket:Type 2 jack

Communication:
Control:Modbus TCP
Network:WiFi/Ethernet
Authentication:RFID (ISO-14443-A), Bluetooth, App
Operating modes:manual charging, scheduled charging, excess PV charging (requires compatible inverters with SmartDongle and Smart Power Sensor)

Security:
Charging cable lock (anti-theft device):permanently via the app
Residual Current Device (RCD):Type A + DC 6 mA integrated (IEC 62955 & IEC 61008-1)

Accessories:
Included:2 pieces of RFID cards

General Data:
Dimensions (H x W x D) :335 mm x 180 mm x 145 mm
Weight:2.9 kg

1) Available in solar excess mode.
2) Applies only to the 3-phase FusionCharge (Technical specifications: AP022N-EU).
3) 1.4 kW for 1-single phase and 4.3 kW for three-phase.

For more details, please refer to the data sheet.

Punjač vozila sa 5m kabela RFID+LCD ZA SVA VOZILA


    Aluminijsko kučište i kaljeno staklo maska. Najprodavaniji punjač vozila u HR - za punjenje VW-Audi - Mercedes - Tesla - Škoda - Citroen - Renault itd ….

    Fuji 7kW za poslovne subjekte ,hotele,javnu uporabu i kućanstva - izrazito robusan !
    Punionica vozila Punjači za elektro vozila 3kW - 240kW auto punjači  


    Communication: WIFI +Ethernet +OCPP1.6 J
    Control: Plug& Play, RFID cards, App
    IP Protection: IP54  
    · Compact design

    Attractive appearance, A4 print paper size, simple but elegant.
    · Full protection
    Full electrical protection, over/under temperature protection, etc.
    · Stable

    SOLAR SHOP Hrvatska www.solarno.hr 

    Dimensions: 410*260*165 mm
    Weight: 9kg /11 kg
    Certificates: CE, RoHS, REACH  
    IP65 protection grade, capable for harsh environment,salt-mist condition.
    · Intelligent
    Intelligent power adjustment, emergency stop, Wifi/APP/ethernet monitoring.
    · European standard
    OCPP v1.6 standard open communication protocol, IEC 62196 type II connector.
    · Easy to install
    Wall-mounting or pole-mounting optional


    Charging Mode 

    Plug & Play: If you own a private parking area, no other person can get access to the charger, then you can choose the mode "Plug & Play" mode.

     

    RFID Cards: If you are installing the EV charger outside, and someone can get access to the charger, then you can use the RFID cards to start and stop the charging.

     

    Remote Control by App: Our M3W EV charger supports the remote control by App, through OCPP 1.6J. If you have your own app, we can provide the technical service to connect your App. Now we also finished the development of our own App for home users.

    Smart Charging 

    Our App is finished with development, now it's under testing. All the new M3W wall box EV chargers can use the app to have a smart charging experience.

     

    Current Adjustment:  You can easily adjust the charging current to fit the balance load.

     

    Flexible Booking Function: The App supports charging booking to enable you to automatically start at any time you want. Choose the period which is cost-effective.

     

    Charging Report: All your charging records will be collected and tabulated to be a report.

     

    WIFI Configuration: You can easily configure the wifi of the EV charger with the APP.


    Punjač auta 7kW T2 Hybrida Električnih - Ispravljači/Pretvarači - OLX.ba 

    Load Balancing Management 

    EV charging load management balances energy demand throughout the day, with a focus on reducing energy usage during peak demands.

     

    Full Charging: When there is no other home appliance used in the house, the power is enough for the fully charging;

     

    Automatically Adjusting: when there are other home appliances working, the load on the main circuit is not enough for the full charging, so the Charge mate will adjust the EV charger to reduce the charging capacity.

     

    How it works ?: We have a current transformer to detect the balance current of the main circuit and automatically adjust the charging power of the EV charging stations, which will make the charging more scientific and efficient.

     

    PLC Wireless Communication: EV charging load management is delivered via a software-based, hardware-agnostic solution where the system is in constant communication with the vehicle charge points and the station’s power infrastructure.

    Safty Protection -Type B RCD

    Electric vehicle (EV) chargers - Within an electrical vehicle, the AC/DC conversion process ensures that charging of the electrical vehicle occurs within the confines of the electric vehicle itself. Electrical vehicle manufacturers state that, in the case of a 3-phase charger, DC current leakage can occur. The same phenomenon is replicated in the case of a single-phase charger with a boost stage.

     

    The electrical vehicle cannot be fully isolated and therefore proper protection against DC residual current is needed in the system. The protection can be accomplished either with a 6mA detection device (Residual direct current detecting device, RDC-DD) inside the charger or with a Type B RCD either inside the panel board or inside the charger itself.

     

    The Type B RCD ensures better continuity of service and protection because it will detect DC current and its tripping value is much higher than 6mA DC. The IEC 62643 requires that RCD trips for DC residual current are not greater than 60mA. This value is lower than the ventricular fibrillation threshold in DC. Type B RCD will also detect earth leakage current at frequencies higher than
    50/60Hz which is not the case with a 6mA RCD-DD.

    Summary of RCD types



ŠIFRA Fusion Cha
CIJENA 5.648,00 kn
 
Kol