|INPUT DATA||Fronius IG Plus 120 V-3|
|DC maximum power at cos ?=1||10590 W|
|Max. input current||46.0 A|
|Max. input voltage||600 V|
|MPP voltage range||230 - 500 V|
|AC nominal output at cos ?=1||10000 W|
|Max. output power||10000 VA|
|Max. output current||14.5 A|
|Max. efficiency||95.9 %|
|Euro. efficiency||95.4 %|
|MPP adaption efficiency||> 99.9 %|
|Grid connection||3~NPE 400 V / 230 V|
|Frequency||50 Hz / 60 Hz|
|Harmonic distortion||< 3 %|
|Power factor||0.85 - 1 ind. / cap.|
|Night consumption||< 1 W|
|GENERAL DATA |
|Dimensions (height x width x depth)||1263 x 434 x 250 mm|
|Degree of protection||IP 54**|
|Inverter concept||HF transformer|
|Cooling||Regulated air cooling|
|Installation||indoor and outdoor installation|
|Ambient temperatur range||From -20°C to +55°C|
|Permitted humidity||0 % to 95 %|
|DC insulation measurement||Warning/shutdown (depending on country setup) at Riso < 500 kOhm|
|Overload behavior||Operation point shift, power limiter|
|DC circuit breaker||integrated|
Grounding on site.
You decide on site, whether or not you want or need to ground the modules. Insert fuse, activate the software - grounding is complete.
For inside and out.
All Fronius IG Plus devices have a robust, well-designed metal housing. UV-resistance and corrosion-protection enable them to be used both inside and out.
Integrated DC disconnect.
No additional installation or cabling is necessary. The highest comfort and safety as per DIN-VDE 0100-712.
The new power plug system.
The connection area and power modules are installed seperately from each other. Very easy, very safe: The connection area is attached to the wall as normal. Then the power module is simply plugged in. The power plug connects both parts into one secure unit. When service is required, the connector remains on the wall - all settings and configurations remain untouched.